[Update: 12Nov2009] The following post may already be outdated. The files featured here are way back from 2007 (the post was made July 2007). Please refer to SSS website for the updated files.
As much as I want to close the comments section, I’m keeping it open so there’s a venue where people can air what’s on their minds. Hopefully, someday, SSS will see it and take action.
By the way, I’m not from SSS or from any of its contractors.
>> The original post follows.
I had a hard time with SSS’ outdated website but since the office needs the files, i need to download it.
Download Files:
Instructions:
- Click and save R3 DISKETTE.exe into your computer.
- Click on R3 DISKETTE.exe to unzip/extract the files in c:\r3tdvb folder.
- Go to c:\r3tdvb\ install folder and click on setup.exe to start the installation of the program.
- At the set-up menu, click the Change directory button, then pick r3tdvb from the directory choices. The path should be c:\r3tdvb.
- During installation there may be files already installed on your computer, which the R3 program will install.
- In cases like these, you will be asked if you want to keep your old files or overwrite it — choose to keep your old files.
- To execute the program, press the start button and go to Programs -> SSS_R3 -> R3.
For Messages that involve missing DLL’s
Please download R3DLL and copy the missing DLL to the directory where the R3.exe resides.
“Print range is greater than paper size”
Please update the printer setup to use letter (8.5″ x 11″) instead of A4 paper size.
Tags: R3 diskette, SSS
March 6, 2009 at 4:12 am
Ive tried to install but when I was about to click the Employer Record Maintenance, the application started not to respond by displaying a “Not Responding” message on its menu bar. And also as I clicked the R3.exe, a message box popped up displaying “The procedure entry point could not be located in the dynamic link lbrary msvcrt.dll”.
Hope to hear from you
March 6, 2009 at 10:21 am
Hi Che,
Please try downloading R3 DLL (download link is above) and put it on your R3 folder. That should take care of your missing dll.
If it still doesn't work, please post more details about your workstation. I have tested SSS R3 on Windows XP but not yet on Vista. Haven't had the chance to check that one yet.
March 25, 2009 at 10:57 am
how can I change the default drive A to other drives like USB?
March 25, 2009 at 11:34 am
Hi baby,
I'm afraid we have to ask SSS for that one feature.
April 4, 2009 at 9:26 pm
nu po b ung problem pg no project name has found?. lagi po gnon. tnx
April 12, 2009 at 7:54 pm
Hi Mikel,
Could you please elaborate on your setup? Is this on a fresh install or are you working on an old record?
April 18, 2009 at 1:20 pm
need a help in installing sss r3, im really having a hard time installing it.. each time i try to install it on a different computer i seems to get the same problem specially when i update update an employee record maintenance.. the error is “run time error ‘13′ TYPE MISMATCH”.. what seems to be the problem could someone please help me, ive’d already tried searching to some solution but noting seems to work on it.. tnx
May 22, 2009 at 2:36 pm
same problem:( run time error 13 type mismatch…need help…please…thanks
June 28, 2009 at 5:24 pm
please try this link -> http://www.sss.gov.ph/sss/index2.jsp?secid=2&cat=101&pg=null. it provides lot of help on errors.
June 23, 2009 at 5:42 pm
where can i get a working copy of the LMS Project, the sss website is in need of an update of their files
June 28, 2009 at 5:06 pm
Have you tried the SSS website? I have downloaded the files from their servers fine.
If it would be of any help, here are the SSS files I downloaded. It’s a mixed group of R3 and LMS.
July 8, 2009 at 12:57 pm
SIr, May I ask for your assistance. I tried to download lmssetup.exe in SSS site. Upon installation it displays dialog box saying that the installer are corrupt.. I also tried to download in your link but the same message appears.
For your reference.
Extracting Image8.gif
Extracting Image9.gif
Extracting Image10.gif
Extracting Image11.gif
Extracting InsGuide.htm
Extracting setup.exe
Extracting SETUP.LST
Extracting Shortcut to HD2DSKXP.COM.pif
Extracting SSS_LM1.CAB
CRC failed in SSS_LM1.CAB
The file “???” header is corrupt
Thanks!!
July 19, 2009 at 6:51 am
Probably because it’s the same file from SSS
July 13, 2009 at 3:47 pm
I have the same errors when extracting the lmssetup.exe downloaded from your link;
Extracting Image8.gif
Extracting Image9.gif
Extracting Image10.gif
Extracting Image11.gif
Extracting InsGuide.htm
Extracting setup.exe
Extracting SETUP.LST
Extracting Shortcut to HD2DSKXP.COM.pif
Extracting SSS_LM1.CAB
CRC failed in SSS_LM1.CAB
The file “???” header is corrupt
I think the source file from SSS website is really corrupt they need to update the site ASAP.
Thanks
FlavsPogz
July 19, 2009 at 6:50 am
The SSS has come a long way since we’re unable to even access their site. Anyhow, I already advised them of your plight. Let’s hope they see it fit to act on it.
BTW, I’m not an SSS employee and I’m not maintaining their code.
July 14, 2009 at 4:37 pm
Naayos na ba nung iba ung probelema nila na type mismatch error ‘13′ sa R3 Program????
July 20, 2009 at 2:28 pm
ask ko lng po,asa employee file maintenance na ako.
pag i-input ko na amount ng sss amount ng -eeror, out of bracket daw po. ano po ba dapat i-input dun na amount, halos lahat kasi ntry ko na, from emplyee shar, total amount, etc.
help naman po. tnx
September 12, 2009 at 2:18 pm
hi,. good day!, regarding po sa report na nagegenerate nitong r3 project diskette, tanong q lng po kung ano ung column name for that report. kailangan q lng poh tlga!,.. please,..
thanks!
September 15, 2009 at 9:03 am
hi,.. another good day!,.
can i ask anyone here why when i fill out for the employee’s data, a promt msg appear and it said “value is out of bracket!” i tried all possible value but it still said the same!,.
thanks in advance!,..
September 30, 2009 at 10:41 am
Once nag input ka at lumitaw na out of bracket try it putting zero ex. 1,560.00.
September 30, 2009 at 2:21 pm
When I input on the SSS Amount, it will say “run time error ‘13′ TYPE MISMATCH”
October 8, 2009 at 11:31 am
hi , gud day poh. baka po pwedeng usb n lang , instead of default drive na A: coz its obsolete na rin kasi . thx
hope u can have that feature soon.
October 15, 2009 at 2:40 pm
how can we open the files of the employee,after installing the program?
October 29, 2009 at 10:40 am
hello. nareformat kasi ang computer ko. ngayon na install na yung r3. pag-open ng employer maintenance at mag-input ka then click yung update. syntax error ang lumalabas. sa employee maintenance naman value out of bracket. tama naman ang mga input.
November 3, 2009 at 2:29 pm
meron bang portable version na sss r3? remote computers gamit ng mga accounting dito. sana naman ayusin nyo serbisyo nyo… kakahiya sa mga client nyo! dami reklamo!
November 6, 2009 at 10:47 am
good morning, I really need help regarding our R3. I have gone through all the process and generated the file which is required by SSS but everytime we submit the said diskette they always returned it with a note “diskette error”. I don’t know what to do anymore I tried everything and every process SSS instructed me to do. Please help. Thank you.
November 7, 2009 at 2:09 pm
hello po meron po kameng problem regarding po sa R3 nag reformat po kase kame ng PC so nireinstall ko po yung R3 ang prob pag nag employee maintenance
nalabas
“Value is out of Bracket” paanu po yung mafifix halos lahat po na Download ko na then nag try me tumawag sa Direct line nila wala nasagot pa help po thanks…
March 2, 2010 at 6:04 pm
if you have a back up of the database format ng R3 mo sa diskette ung ssscont ata filename nun, just restore it by clicking System Maintenance then Restore Database.
December 4, 2009 at 12:22 pm
I need specs of R3 for our ongoing program. Do you have any?
January 5, 2010 at 11:48 am
may i know who develop this sss r3 software…
pls do fixed your program! or update it to new version… we are having alot of problems… always need to reinstall… if you can’t do it then share your code, we will update it!
February 3, 2010 at 2:33 pm
hello po!
bakit ayaw mag install yung program na na-download ko dito sa site? i downloaded the two links above and followed the instructions pero ayaw talaga. there is always an error that occurs everytime i do the installation. i also tried to install the same installer with other PCs but still the same result. tulong naman please. thanks..
March 2, 2010 at 5:41 pm
How to use thumb drive, pen drive, or simply USB as a substitute for the diskette requirement for the SSS R3:
1. Disable Floppy from the BIOS by pressing Delete before the Windows icon appear when you open the computer
2. Save the BIOS setting then insert your USB
3. Change the drive letter of your USB to A by:
a. click the Start button or the windows icon in your desktop
b. Click Control Panel> Performance and Maintenance> Administrative Tools? Computer Management> Disk Management
c. Select and right click on your USB
d. Choose> Change Drive Letter and Path
e. Change your original drive letter to A
f. Click> Ok
4.You can now use your USB in place of the diskette requirement
Note:
Error may appear but ignore it because later it will notify you for successful transfer of SSS R3 file to your USB.